The 46-Inch Accessible Table at a Glance
The Black ADA metal mesh picnic table with thermoplastic coating is the 46-inch single-access model in Arlau's steel range: two fixed benches, a 58-inch-wide tabletop and one long side left open for a wheelchair approach. The top and seats are expanded steel with ¾-inch diamond openings, welded to a 2-inch tubular frame; the frame carries a black powder coat, while the top and seats take the thicker thermoplastic layer. It is a commercial picnic table for parks, school grounds, clinic gardens and hotel terraces, not a folding domestic unit. The 46-inch seating square keeps four adults at the benches, and the open side can be used as an ordinary seat when no one needs the access position. Color is applied to order from a 21-shade palette, so a site can match paving, cladding or a district standard rather than settling for one stock finish.
How the Diamond Mesh Handles Weather
On this table, the ¾-inch diamond openings do the work a flat top cannot. Rain falls straight through the top and benches instead of pooling, so the seating is usable minutes after a shower; air moving through the panels keeps them dry in shaded parks; leaves, sand and crumbs drop out rather than collecting where the next person sits. The raised diamond pattern gives shoes and hands something to grip when the surface is wet. Because the panels are expanded from a single steel sheet rather than punched as a flat plate, the strands stay rigid under load while the open area keeps the panels manageable to handle. The closed coating over the mesh resists graffiti and marker, and most marks lift with a household cleaner.
Surface Heat in Summer
The mesh is the reason this top sheds heat instead of storing it. The ¾-inch diamond openings in the 12-gauge expanded steel break the surface into narrow strands with open air between them, so much less metal sits directly under the sun than on a solid plate, and air moves through the panel rather than lying on it. A solid steel or timber top traps a layer of warm air against the surface; the diamond mesh does not. What the thermoplastic layer does in the sun. The coating is non-porous and smooth, so water stays on the surface and evaporates instead of soaking in. A quick hose-down at a poolside table, or a splash from wet swimwear, cools the top and benches and leaves no stain or swelling behind. That is also why the benches stay usable straight after a rain shower when the pad around them is still wet. Pick the shade with the site in mind. This model is built in black, and black absorbs more of the sun's energy than a pale tone. If the table will stand in unshaded afternoon sun on a playground or a pool deck, a lighter shade from the 21-color palette will feel cooler under hand and bare leg than black does. Shade is the real answer at midday. The 1.75-inch opening in the top takes a standard market umbrella, which covers most of a 46-inch top and reaches both benches. Tell us at the quotation stage if umbrellas are planned and we will confirm the pole fit against that opening. Placement matters as much as the fitting: a table under trees, a pergola or the shaded side of a building stays noticeably cooler than one in open sun, and where the site allows it, keep the open access side off the full afternoon sun. Nothing in the seat soaks up heat or water. The benches are steel under the same closed coating, with no foam, timber or fabric core to hold moisture after a splash or a storm. Wipe or hose them and they are ready for the next group. What to expect on a hot day. A steel table in direct summer sun will feel warm to the touch, and we do not publish a surface-temperature figure because it shifts with air temperature, wind, sun angle and color — the same table in partial shade at 30 °C behaves very differently from one in full sun. At playground and poolside sites, the routine that works is shade where you can get it, a lighter shade where the sun cannot be avoided, and a quick hose-down before the busiest part of the day.
Frame, Fixings and Edge Finish
- 2-inch tubular steel frame. The main frame is formed from 2-inch tube, so the top, benches and legs act as one structure.
- 12-gauge expanded steel panels. The tabletop and seat panels are 12-gauge steel with ¾-inch diamond openings; the open pattern drains water and keeps the panels from holding heat the way a solid plate can.
- Two finishes in the right places. The frame takes a black powder coat; the top and seats take the thicker thermoplastic layer. They are different products because tubular steel and flat panels age differently. The fasteners at every joint are stainless, which is where painted outdoor furniture usually starts to rust.
- Rounded panel edges. Seat and table edges are finished round, so there is no sharp lip at hip or hand height. The unit is heavy enough to stay put under a full bench of adults and in wind; on an exposed site, tell us the fixing surface so anchoring can be discussed.
Checks from Steel Cutting to Final Pack
Production starts with steel sheet cut to size and frame sections formed. The frame, brackets and panel supports are welded into one rigid structure and checked for square, then sandblasted so the coating has a key. The frame receives a black powder coat; the top and seats receive the thicker thermoplastic layer, applied and cured in-house. Tabletop and legs are assembled into a semi-finished unit, inspected for coating coverage, mesh alignment, edge finish and hardware, then finished and packed for export. As a picnic table manufacturer, we keep those checks on our own line rather than relying on a third party.
One Open Side, Clear Approach
- The top is 58 inches wide, not a plain 46-inch square. The extra width forms the approach along one long side, so a wheelchair user pulls up to the table edge instead of sitting at the end.
- Knee space sits under the table edge. The overhang gives the chair room to tuck in, and the user sits level with the benches rather than lower or off to one side.
- The benches stay fixed. No seat section has to be unbolted or carried away to free the accessible place, so the unit remains a full table for everyone else.
- The approach depends on the site. A firm, level pad, a clear route from the path or plaza and no kerb at the open side are what make the geometry usable; keep that route clear through winter.
- Single access is the compact choice. For two accessible positions, the 8-foot double-sided models open both long sides; this ADA picnic table is sized for a normal park pad, courtyard or terrace.
- 1. Choose the open side before the pad is set: face it toward the path, not a wall, planter or bin bay.
- Keep the pad level and flush with the surrounding surface, with an unobstructed route from the car park or plaza.
- Leave the approach clear of kerbs, steps and seasonal planting; in winter, keep snow and ice off that route.
- Tell us the fixing surface — concrete, paving or deck — when you request the quote, so anchoring can be discussed with the order.
- Check the installed layout against the accessibility code your project is inspected under before the slab is poured. The table's geometry is fixed; the approach route on site is not.
Where a Single-Access Table Works Well
- Municipal parks and trailheads. A compact table for a picnic lawn, plaza edge or trailhead where the access position lets a family arriving with a wheelchair sit together.
- School courtyards and campus lunch areas. The mesh top is dry soon after rain, and the coating takes the scuffs of daily student use without a repainting cycle.
- Healthcare and senior living gardens. The open side lets a resident in a wheelchair join a family visit at the table rather than beside it; a level route close to the entrance matters more than a long walk.
- Hotel, resort and restaurant terraces. The black finish and diamond mesh read modern, and the surface wipes clean between services.
- Transit plazas and community centers. A compact commercial picnic table for short stays where a fixed unit has to resist graffiti and constant use.
- Phased site programs.
Dimensions and Build Data
| Item | Specification |
|---|
| Overall footprint | 80" L × 65" W × 30.5" H |
| Tabletop | 46" L × 58" W × 2" thick |
| Benches (each) | 38" L × 12" W × 18" H × 2" thick |
| Tabletop and seat panels | 12-gauge expanded steel |
| Mesh pattern | ¾" diamond openings |
| Frame | 2" tubular steel |
| Frame finish | Black powder coat |
| Top and seat finish | Thermoplastic coating |
| Umbrella opening | 1.75" diameter |
| Hardware | 304 stainless steel screws |
| Unit weight | 280 lbs |
| Colors | 21 fade-resistant thermoplastic finishes |
| Accessibility | ADA compliant, wheelchair approach on one long side |
Choosing from the 21-Color Palette
| Finish type | Shades | Surface | Where it suits |
| Regular thermoplastic | 13 | High-gloss, smooth | Formal plazas and bright color schemes |
| Textured thermoplastic | 8 | Fine grain, lower glare | Busy seating and open plazas |
| Custom match | Approved shade | Matched to a physical reference | District standards and brand palettes |
| Batch curing | All shades | Cured before dispatch | Multi-phase projects that need one color |
Placing a Project Order
- Minimum order. 10 pieces, depending on the product — confirm the quantity for your exact configuration with your sales contact.
- Lead time. From 10 days, depending on the product. Give us your installation date and we will confirm the schedule in writing before you commit.
- Finish at the point of order. Name the shade and whether you want gloss or textured; the coating is applied to order and cannot be changed once the run starts.
- Custom matching. For project colors, send a physical reference and approve the match before production.
- Delivery. Multi-unit orders are scheduled to the site; confirm the unloading arrangement at your location.
- Who you are buying from. Your order is placed directly with the picnic table manufacturer rather than through a trading layer, so specification changes and color approvals reach the people running the line.
- Project quantities. As an outdoor picnic table supplier for municipal and campus work, we schedule phased deliveries and repeat orders against the same approved color, so phase two matches phase one.
Scale & Supply Capability
Arlau is a manufacturer, not a middleman: Chongqing Arlau Civic Equipment Manufacturing Co., Ltd has been producing outdoor furniture and public facilities since 1999, more than 26 years in the trade. Our 13,000 sqm factory runs a fully automatic robot production line with an annual output of 130,000 pieces, and a 100-person team covers production, export paperwork and after-sales follow-up. Goods ship to more than 80 countries and regions. OEM/ODM one-stop export service is handled in-house, so you keep one contact from drawing to delivery.
FAQ
What does the open side of this ADA picnic table provide?
It gives a wheelchair user knee space under the 58-inch-wide top and a position level with the benches, so they sit at the table rather than at the end. The seating square stays 46 inches, and the two benches still take the rest of the group. The approach depends on a level pad and a clear route, which are settled on site.
How does the diamond mesh top handle rain and debris?
Rain falls straight through the ¾-inch diamond openings instead of pooling on the top or benches, so the table is usable minutes after a shower. Air moves through the panels and keeps them dry in shaded parks, and leaves, sand and crumbs drop out rather than collecting. The raised diamond texture also gives shoes and hands something to grip when everything is wet.
Which of the 21 colors should I choose?
Start with the color chart and narrow it to two or three shades that suit the paving, cladding or team colors they will sit beside. Choose the regular high-gloss thermoplastic (13 shades) for a crisp formal look, or the textured finish (8 shades) where glare and everyday scuffing matter on busy seats. For a district or brand color, send a physical reference and approve the match before the run starts.
How many people can sit at the 46-inch table?
Two benches run down the long sides, and the open side can serve as an accessible position or an ordinary seat. That normally means four adults on the benches with room for a wheelchair user at the open side, or five seated diners when the access position is used as a seat. For larger groups, the 8-foot models seat more people on the same principle.
Does the table need to be taken in for winter?
No. The closed coating, black powder-coated frame and 304 stainless fixings are chosen for permanent outdoor service, so the table stays out through winter. The only cold-weather task is keeping the open side and the pad clear of snow and ice so the access position remains usable.
What keeps the fasteners from rusting?
The screws at every joint are 304 stainless steel, so they do not rust at the connection points where painted outdoor furniture usually starts to fail. The frame also carries a black powder coat, and the top and seats are sealed under the thermoplastic layer.